Surly Ogre and ECR Bike Bags: Bikepacking and Loaded Touring

Surly describes the Ogre with three words: bikepacking, doubletrack, exploration. It is a steel 29er with mounts almost everywhere: in the frame, on both fork legs, and for racks and fenders front and rear. Its sibling, the ECR, went further with 29+ and 27.5+ tyres, but Surly no longer makes it. Plenty are still being ridden, and the bag question for both bikes is the same. With so many mounts available, the hard part is deciding what to leave empty.

Treat the Surly Ogre as a map of places a bag can go, and fill them in order of usefulness. The front triangle first, with a frame bag made to it. Then the handlebar, with a roll for the sleep kit — the wide swept bar takes a long one. Water on the fork and in feed bags. Racks only when the trip needs the volume, rear before front. Each mount you use adds weight before you've packed anything, so the best Ogre setups leave some empty.

The Ogre and the ECR, briefly

From Surly's current Ogre page and the archived ECR page:

  • Ogre. Clearance for 29 × 2.5" or 27.5 × 2.8" tyres with fenders. Frame bottle mounts: two Three-Pack mounts on XS–SM; one standard plus two Three-Pack mounts on MD–XL. Fork: rack mounts at upper, lower and mid-blade positions, plus cargo mounts. Fender mounts front and rear. No internal dropper routing on the current frame. It comes with a Salsa Bend bar, 700–740 mm wide depending on size.
  • ECR. Discontinued. It was 27.5+ on sizes XS–M and 29+ on M–XL, with clearance for 29 × 3.0" tyres with or without fenders. Racks front and rear, fender mounts, and four Three-Pack mounts on the fork.

The Ogre, place by place

1. Front triangle. This is the most valuable space, because weight here rides low and central and doesn't affect steering. Food, water, tools, the stove and fuel belong here. A full frame bag uses the triangle best when you carry no bottles in it. Our custom full frame bag in X-Pac is made to your measurements and fastens with Velcro on all sides. On the smallest sizes, or when you want the Three-Pack mounts inside the frame for water, a Half Frame Long sits under the top tube and leaves them free.

2. Handlebar. The Bend bar is wide and swept, with no hoods or drops to work around, which suits a long roll. The BIG ROLL is about 63 cm long when rolled and 20 cm in diameter — enough for a sleeping bag or a tent body. The PANZER is made for sleeping bags and tents, with an adjustable diameter. Keep the roll for light, bulky things. A heavy bar bag makes a loaded 29er wander on slow climbs.

3. Stem. A pair of feed bags, such as the FX-1, for a bottle and the snacks you eat while riding. On a long day these are the bags you open most.

4. Fork legs. Cargo cages for bottles, or small dry bags for tent poles, spare food or fuel. Keep the two sides equal. Our fork bag and cargo cage guide covers loading them.

5. Under the saddle. A small bag for the tube and repair kit. The Ogre has no internal dropper routing, so many owners ride a fixed post, and a small saddle bag never has to dodge a moving post. For more rear volume, a large seat pack is best used with a dedicated rack for it — and once you have a rack, you can choose a bigger bag.

6. Rear rack. The first rack to add, and the one that turns the Ogre from a bikepacking bike into a tourer. The RANDONE rear rack bag holds 10 litres in total, with a four-point mount and a waterproof bottom. A trunk bag on top carries what you need during the day.

7. Front rack or low-riders. The mid-blade fork mounts suit a low-rider rack, which keeps front weight low. Or use a front rack with a single bag: the Frontliner is 30 × 40 × 15 cm, with reinforced walls, YKK zips and MOLLE points. The GOU-TU is made to the dimensions of your front rack. Our article on bike bags for touring explains the four-bag layout this leads to.

Three Ogres from the same frame

The seven places above combine into three typical builds. Each one adds to the previous build rather than replacing it:

TripPlaces usedLeft empty
Overnight on singletrackTriangle, handlebar, stem, saddleFork, both racks
A week with resupplyThe above + fork legs + rear rackFront rack
Long unsupported tourAll seven; half frame bag instead of full—

Notice what changes in the last row. With both racks carrying volume, the frame bag can shrink to a half frame bag for tools, a pump and the first-aid kit, and the bottles return to the triangle.

The cost of every mount

Each cage, rack and bag has its own weight, and every extra bag is one more thing to pack, check and close every morning. A setup that uses half the mounts and fills them well rides better than one that uses all of them half-full. A useful test: if a bag has stayed half-empty for two days, take it off at the next stop and post it home or redistribute its contents. Why weight distribution matters explains where the heavy things should go.

ECR owners: the same map, wider tyres

The ECR's plus tyres put more rubber close to the bags. Check that fork cages and low-rider bags clear the tyres when fully loaded, and that rack bags clear the fenders if you run them. If you bought an ECR second-hand, measure the triangle yourself: sizes and wheel sizes differ across the range, and the frame bag has to follow your frame, not a size chart.

Bikes like these are why we build LESENOK Colorful Cycling System Bags as separate pieces: you start with three bags and add the rest when the trips get longer. See our frame bags, trunk and rack bags and front rack bags.

In short

  • The Ogre has mounts nearly everywhere; the ECR is discontinued but works the same way.
  • Fill places in order: triangle, handlebar, stem, fork, saddle, rear rack, front rack.
  • A wide swept bar takes a long roll — keep it for light, bulky gear.
  • Add racks only when the trip needs them; with both fitted, a half frame bag is enough.
  • On an ECR, check that bags clear the plus tyres and the fenders.

Planning an Ogre or ECR build? Send a side photo, the frame size and a few words about the trip to [email protected], and we will suggest where each bag goes.

About LESENOK

LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].

Back to all articles
Help