Salsa Fargo Bikepacking Bags: Rackless, Racks or a Mix

Salsa calls the Fargo its original drop-bar mountain bike. The current steel frame is described simply as a bikepacking frame. What sets the Fargo apart is choice: it has room for a big frame bag, mounts on the fork legs, and mounts for racks and fenders. The same bike can carry soft bikepacking bags on a singletrack weekend and panniers on a month of back roads. The question is less what fits than which of the two setups suits the trip.

On a Salsa Fargo, decide first between a rackless bikepacking setup and a rack-based touring setup — or a mix. Rackless: a custom frame bag, a handlebar roll, fork-leg cages and a small saddle bag, for rough tracks where the bike must stay narrow and light. Rack-based: rear panniers or a trunk bag on a rear rack, with low-rider bags or a front rack bag up front, for long distances on roads and gravel where volume matters more than clearance. Most Fargo owners end up somewhere between the two.

What the Fargo gives you to work with

From Salsa's pages for the current steel Fargo and the previous one:

  • Bottle mounts in the frame. Two on the XS, three on sizes SM to XL.
  • Fork mounts. The current fork has one set of Three-Pack mounts on each leg. The previous Fargo fork had two sets per leg, so check which one you have before planning four cages.
  • Racks and fenders. Low-rider rack mounts on the fork, and a frame ready for a rack and fenders.
  • Tyres. The current frame is designed around 29 × 2.2" tyres, with room for up to 3.0" on sizes SM to XL.
  • Seatpost. Salsa lists the current Fargo as not dropper-compatible. That makes life easy for a saddle bag, which never has to dodge a moving post.
  • Bars. The geometry is built around the flared Cowchipper or Woodchipper.

Setup A: rackless, for rough ground

Narrow and quiet: nothing hangs wide of the frame, nothing rattles on a rack, and the bike can be lifted over a fallen tree or pushed up a rocky climb without bags catching.

  • Frame bag. A custom full frame bag made to your triangle takes the heavy, dense things: food, water, tools, the stove. If you want a bottle inside the frame, choose the Half Frame Long, which is cut to your frame and leaves space for bottles below it.
  • Handlebar. The sleeping bag and soft layers in a roll — the PANZER is made for exactly that, with a three-point mount and an adjustable diameter.
  • Fork legs. Cargo cages for water or light dry bags. The current fork's one set per leg is usually enough for two bottles or two small bags.
  • Feed bags. A pair on the bar for a bottle and snacks while riding.
  • Saddle bag. A small one for the repair kit, such as the SD-3.

This setup is limited by volume. It suits trips of a few nights with resupply, or a light sleeping kit. When it is full, the next step is a rack rather than strapping more to the outside of the bags.

Setup B: racks, for long distances

When the trip is long, food has to last between shops, or you carry a cooking kit and a proper tent, a rack takes over. The Fargo is ready for one, so you lose nothing by fitting it.

  • Rear rack. A rear rack bag such as the RANDONE — 10 litres in total, a four-point mount, reinforced walls and a waterproof bottom — or a smaller trunk bag on top for a lighter load. The TRANSFORMER changes from a compact trunk bag into a pannier-style bag, from 8 to 25 litres, so one bag covers both light and loaded days.
  • Front. Low-rider bags keep weight low and the steering calm. A front rack bag such as the BIG WAY (28 × 28 × 28 cm, made to your rack) holds the day's food, a jacket and the map where you can reach them.
  • Frame. A half frame bag still earns its place for tools and the things you need at every stop, with bottles below it.

Before buying bags, check the rack: our guides to choosing a rear rack for bike bags and whether panniers will fit your rack list the measurements that matter.

The mix most Fargo riders end up with

The common middle ground is a full or half frame bag, a handlebar roll and a rear rack with one trunk bag or a pair of small rack bags. It keeps the front of the bike free for steering on rough ground, and the rear can be loaded more heavily on days when the road is easy. Later you can add fork cages or low-rider bags without changing anything else.

RacklessRear rack addedFront and rear racks
Best forSingletrack, hike-a-bike, short tripsMixed gravel, a week with resupplyLong tours, remote stretches
FrameFull frame bagFull or half frame bagHalf frame bag + bottles
FrontRoll + fork cagesRoll + fork cagesLow-rider bags or front rack bag
RearSmall saddle bagTrunk bag or two rack bagsRack bags + trunk bag

Weight, steering and the drop bar

The Fargo's handling stays calm when the heavy things sit low and in the middle, and the bar carries only light, bulky things. A heavy handlebar bag makes the front wobble on slow climbs, more so on a drop bar where your hands are close together on the hoods. Our article on why weight distribution matters when packing your bike goes through the order.

This is where LESENOK Colorful Cycling System Bags fit a bike like the Fargo: you start with the bags you need now, and add or swap pieces when the trips change. See our frame bags, trunk and rack bags and fork bags.

In short

  • The Fargo carries both soft bikepacking bags and racks — choose by the terrain and length of the trip.
  • Check your fork: the current Fargo has one set of Three-Pack mounts per leg, the previous one had two.
  • Rackless: custom frame bag, handlebar roll, fork cages, feed bags and a small saddle bag.
  • Rack-based: rear rack bags or a trunk bag, low-riders or a front rack bag, and a half frame bag for tools.
  • Keep heavy things low and central; the handlebar is for light, bulky gear.

Planning a Fargo trip and unsure which way to go? Write to [email protected] with a photo of the bike and a few words about the route, and we will suggest a combination.

About LESENOK

LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].

Back to all articles
Help