Salsa Cutthroat Frame Bag and Bikepacking Setup
The Salsa Cutthroat was drawn around a frame bag. Salsa says it plainly on every generation of the bike: the frame is "designed for maximum frame bag volume on every size". It is a drop-bar bike inspired by the Tour Divide, and the open front triangle is the reason many riders choose it over other gravel frames. The usual mistake is to treat that space as an afterthought and fill it with a small bag from the shelf.
On a Salsa Cutthroat, build the setup from the frame bag outwards. A full frame bag cut to your size carries the heavy, dense things low and in the middle; the three-pack mounts on the fork legs take water or light dry bags; the handlebar carries the sleep kit in a roll that clears the drops; and a top tube bag and feed bags hold what you eat and reach for while riding. Because the triangle is so large, water bottles move out of the frame — that is the trade the bike was designed for.
What Salsa built into the frame
These details come from Salsa's own product pages for the current Cutthroat and the previous generation, sold from 2020. Check your frame against them, because some numbers change between sizes and years.
- Frame bag space on every size. The triangle is stated as designed for maximum frame bag volume, from the smallest frame upwards.
- Top tube mount. Both recent generations list a mount for a top tube bag.
- Bottle mounts inside the triangle. Two on frames up to 54 cm, three on 56 cm and larger. The current and previous frames also have two pairs under the down tube.
- Fork. One set of Three-Pack mounts on each fork leg, and low-rider rack mounts.
- Rear rack. Possible, but Salsa lists a Rack Lock seatpost collar as required.
- Tyres. The previous frame takes up to 29 × 2.4". The current one fits 29 × 3.0" up front and 29 × 2.4" at the rear.
- Bars. The geometry is built around Salsa's flared Cowchipper or Woodchipper drop bars.
Step one: the frame bag
A full frame bag is the heart of a Cutthroat setup, because it is the one place on the bike where weight rides low, central and out of the wind. It is where the water bladder or spare bottles, food for the day, tools, the pump and the cook kit belong. Nothing in it swings or affects the steering.
Our custom full frame bag in X-Pac is made to the measurements of your frame and fastens with Velcro straps on all sides. As a rule it has two compartments, upper and lower, which can be combined into one. The Velcro full frame bag and the Middling are the same idea in other fabrics and layouts. After you order we send a diagram showing how to measure the triangle, so the bag follows the Cutthroat's tubes, not a generic shape.
Three things are worth mentioning when you send the measurements:
- Your frame size, because the bottle count inside the triangle changes at 56 cm.
- Whether you run a dropper post, and how the cable is routed. Salsa routes some dropper cables externally along the top tube, and the bag should leave room for that.
- Whether you want a bottle inside the frame. If you do, a half frame bag such as the Half Frame Long leaves room below it. If you don't, the full triangle is yours.
Our guide on how to measure your bicycle for a custom frame bag shows what to measure and how to photograph it.
Step two: where the water goes
Filling the triangle means bottles have to live somewhere else. The Cutthroat gives you three options, and most riders use two of them.
- Under the down tube. Good for a spare bottle or a tool keg, though it collects dirt from the front wheel.
- The fork legs. The Three-Pack mounts take cargo cages for bottles or light dry bags. Keep the load symmetrical, left and right.
- Feed bags on the bar. A bottle in a feed bag is the one you can reach without stopping. That makes a pair of feed bags the most used bags on many long rides.
The FX-1 feed bag is X-Pac with a three-point mount and a mesh bottom that lets water drain out. The Feeder X-Pac set comes as a pair, with one open drawstring version and one with a buckled flap for things you want covered. Our fork bag and cargo cage guide explains how to load the fork legs without upsetting the steering.
Step three: the handlebar
The Cowchipper and Woodchipper bars flare outwards at the drops, so a roll fits between the hoods more easily than on a narrow road bar. Even so, the bag has to clear your hands in the drops and the brake levers. A roll that is too long will push against the levers or the cables.
The handlebar is the place for soft, light, bulky things: the sleeping bag, an insulated jacket, the tent body without its poles. The PANZER is a three-point roll made for sleeping bags and tents, and its diameter adjusts as you pull it tight. The BIG ROLL is 20 cm in diameter and about 63 cm long when rolled. Measure between your hoods before choosing. If space is tight, a shorter roll packed tightly is better than a long one that rubs on the levers. Choosing a handlebar bag for a drop bar covers this in detail.
Step four: the small bags
The top tube mount is for the bag you open twenty times a day: snacks, sun cream, a phone, a map. Because the Cutthroat already has the mount, a top tube bag stays put without a strap round the stem. Add a small SD-3 saddle bag for the tube and repair kit, and the Cutthroat is packed without a rack.
For longer trips the rear is the natural place to add volume. A large seat pack is best used with a dedicated rack for it, and once you have a rack you can choose a bigger bag. A low-rider rack on the fork is the other option.
A Cutthroat set in one order
If you would rather order once, the X-Pac set with a frame bag and two feed bags covers the first two steps in matching fabric. The frame bag is sized to your frame if needed, and the colours are Coyote, Olive, Gray and Black. Add a handlebar roll and a saddle bag to finish the setup.
That is how LESENOK Colorful Cycling System Bags are meant to work on a bike like this: every bag has a place, and the biggest one is cut to fit. Browse our frame bags and handlebar bags to put yours together.
In short
- Salsa designed the Cutthroat triangle for maximum frame bag volume on every size — use it for the heaviest, densest gear.
- A custom full frame bag follows the tubes. Tell us your frame size and how your dropper cable is routed.
- Water moves to the fork's Three-Pack mounts, under the down tube and into feed bags.
- The flared drop bar takes a roll for the sleep kit, but it has to clear the levers and the drops.
- A top tube bag and a small saddle bag finish a rackless setup.
Questions we get asked
Does a full frame bag fit a small Salsa Cutthroat?
Yes. Salsa designs every Cutthroat size for frame bag volume, and a custom bag is cut to your triangle. Small frames have less room, so a very small bag is made with a single compartment.
Can I still use bottles inside the frame?
Yes, with a half frame bag instead of a full one. It sits under the top tube and leaves the lower bottle mounts free.
Do your frame bags use the Cutthroat's bolt-on mounts?
Our frame bags fasten with straps, so they fit regardless of the bosses. The top tube mount is still useful for a top tube bag.
Where do the water bottles go if the frame bag fills the triangle?
Under the down tube, in cargo cages on the fork's Three-Pack mounts, and in feed bags on the handlebar. A bottle in a feed bag is the one you can reach without stopping.
How long can a handlebar roll be on a Cutthroat?
Measure between your hoods before choosing. The roll has to clear your hands in the drops and the brake levers; a shorter roll packed tightly is better than a long one that rubs on the levers.
Riding a Cutthroat and unsure how big the frame bag should be? Send a side photo of the bike and the triangle measurements to [email protected] and we will suggest a layout.
About LESENOK
LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].
