Canyon Grail Bikepacking Bags: Hover Bar, Frame Bag and Rear

"Which bags fit a Canyon Grail?" has no single answer, because three quite different bikes share the name. The first carbon Grail had the double-decker Hover Bar, and that bar decides most of the front setup. The next generation dropped it for a one-piece bar and added mounts on the top tube and the fork. The newest one clears much wider tyres. Before choosing bags, find out which Grail you have. Most of the advice below depends on it.

For a Canyon Grail, the frame bag, the saddle bag and the feed bags work on every generation. The handlebar setup does not. On a Hover Bar Grail, use a handlebar bag that straps to the upper bar, and move the computer and lights to band-on mounts the bag won't cover. On a Grail with a one-piece bar, a roll or bar bag fits as on any drop bar, provided it clears the levers. Carbon Grails of the first generation have no rack eyelets, so the rear stays rackless. The aluminium Grail has rack mounts.

Which Grail do you have?

  • First-generation carbon Grail (CF SL, CF SLX). Hover Bar: the tops sit above a short stem, and a second bar joins the hooks. Clearance for 42 mm tyres, mudguard mounts, and no rack eyelets on the carbon frames. VCLS 2.0 seatpost, made of two D-shaped halves.
  • Grail AL. A normal aluminium gravel bar, mudguard and rack mounts, and room for two bottles and a frame bag. The two smallest sizes use 27.5" wheels.
  • Second-generation carbon Grail. No Hover Bar. A one-piece drop bar, with a Gear Groove slot for a computer or lights on most models. Mounts on the top tube and under the down tube, clamp-on fork sleeves rated for up to 3 kg per leg, a D-shaped Comfortpost and 42 mm tyre clearance.
  • Newest carbon Grail. Clearance for 57 mm tyres, single chainring only, fender mounts on the CF SLX and CF but not on the CFR, and the VCLS seatpost back.

These details come from Canyon's range page and independent reviews of each generation. Check your own bike against them.

The Hover Bar and a handlebar bag

The Hover Bar gets more questions than any other part of the Grail. Reviewers agree on two things. A handlebar bag mounts well on it: the upper bar is a convenient place to strap one. And the bag gets in the way of other accessories. With no round section on the bar, most lights have to use a band-on mount, and most dynamo lights won't fit at all. A bag on the bar also covers the out-front computer mount under the stem.

That gives a simple order for setting up the front:

  1. Decide where the computer and light go first. Band-on mounts on a part of the bar the bag won't cover, or on the fork.
  2. Then choose the bag. A bag that straps to the upper bar and doesn't hang down onto the lower one. For day rides, a compact handlebar bag. For an overnight, a roll packed short and fat, so it stays clear of the levers.
  3. Keep the bag light. The front of a Hover Bar Grail feels a heavy bag as much as any drop-bar bike.

Canyon advises against swapping the Hover Bar, and the non-standard steerer limits which stems would fit anyway. So plan the bags around the bar rather than the other way round.

One-piece bar Grail: a normal drop bar

The second and newest generations have a one-piece cockpit, so a handlebar bag works as on any drop-bar gravel bike. Measure the space between the hoods before choosing a roll. The PANZER is a three-point roll with an adjustable diameter, for a sleeping bag or a tent. For days out, a smaller bag from the handlebar bag range is enough. On Grails with the Gear Groove, a bag strapped to the bar can still cover a computer in the slot, so check the order of things as above. Our guide to handlebar bags for drop bars covers lever and cable clearance.

The frame bag: the same on every Grail

The front triangle is the most useful space on any Grail. Canyon's own accessories for the second generation include a magnetic frame bag, which tells you the space is meant to be used. A bag made to your triangle uses it better than a standard size.

  • For long days with bottles, a Half Frame Long made to your frame leaves room for bottles below it.
  • For bikepacking, a custom full frame bag in X-Pac fills the triangle. The bottles move to the fork sleeves, under the down tube or into feed bags.

On a second-generation Grail with the down tube storage hatch, ask for the bottom edge of the bag to leave the hatch accessible. The frame measuring guide shows what to measure.

Small bags and the rear

Top tube. The second-generation Grail has a top tube mount for a bag you open while riding. On earlier frames a strap-on top tube bag does the same job.

Feed bags. A pair either side of the stem, such as the Feeder X-Pac set, for a bottle and food. On a Hover Bar Grail, make sure they don't block the hands on the lower bar.

Saddle bag. The Grail's seatposts are D-shaped or, on VCLS versions, made of two D-shaped halves built to flex. A small saddle bag strapped tightly to the rails and post, such as the SD-3, carries the repair kit. With no rack eyelets on the first carbon frames, volume at the back is limited to what a saddle bag can hold. If you want more, a large seat pack is best used with a dedicated rack for it, and with a rack you can choose a bigger bag. On the Grail AL, a rear rack with a trunk bag is the simple way to add space.

Whatever the generation, LESENOK Colorful Cycling System Bags work the same way: one bag per place on the bike, the frame bag cut to fit. For a sister bike with a different cockpit, see the Canyon Grizl setup guide, and browse our frame bags.

In short

  • Three Grail generations differ at the front — check which one you have.
  • Hover Bar: a bag straps well to the upper bar, but plan the computer and lights first, on band-on mounts the bag won't cover.
  • One-piece bar: a normal drop-bar setup that clears the levers.
  • Frame bag on every Grail: half frame with bottles or full frame for bikepacking, made to your triangle.
  • First carbon frames have no rack eyelets — keep the rear to a small saddle bag; the Grail AL takes a rack.

Questions we get asked

Can you put a handlebar bag on a Canyon Grail with the Hover Bar?

Yes — the upper bar is a good place to strap one. Plan the computer and lights first, because the bag covers the out-front mount, and most lights need band-on mounts on this bar.

Can I fit a rack to a carbon Grail?

The first-generation carbon frames have no rack eyelets. The aluminium Grail AL has rack mounts.

Not sure which bags fit your Grail? Send a photo of the bike and the cockpit to [email protected], and we will suggest a layout.

About LESENOK

LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].

Back to all articles
Help