Cannondale Topstone Bikepacking Bags: Kingpin, Mounts and Fit

The Cannondale Topstone comes in two quite different forms. The aluminium Topstone is a simple gravel frame with rack mounts. The Topstone Carbon has Kingpin, a pivot that lets the back of the bike move. Cannondale lists bikepacking among the Carbon's uses, and riders do take it bikepacking, but a frame that flexes deliberately raises a question an ordinary frame doesn't: which bags ride on parts that move?

On a Topstone Carbon, the front triangle and the fork do not move with Kingpin, so a frame bag, a top tube bag, feed bags, a handlebar roll and fork cages work as on any gravel bike. The seatpost and rear triangle do move — up to 30 mm, according to Cannondale — so keep the saddle bag small and clear of the tyre, and do not strap bags to the seatstays. On the aluminium Topstone, which has rack mounts, a rear rack is the simplest way to add volume.

What Kingpin moves, and what it doesn't

Cannondale describes Kingpin as a thru-axle pivot in the seat tube that lets the rear triangle and the seatpost flex vertically, giving up to 30 mm of travel. An independent long-term review places the pivot at the top of the dropped seatstays, with the seat tube bending like a leaf spring.

For bags this splits the bike in two:

  • Still: the front triangle above the pivot, the head tube, the handlebar and the fork. Bags here behave as on a rigid frame.
  • Moving: the seatpost, the saddle, the seatstays and the rear wheel's position relative to the saddle. Anything fastened to these parts moves with them.

Cannondale does not publish guidance on frame bags or saddle bags with Kingpin, so what follows is practical reasoning from how the parts move, not a manufacturer rule.

Topstone Carbon: the mounts

From Cannondale's page and the long-term review of the current carbon frame:

  • Three bottle mounts: two inside the main triangle and one under the down tube.
  • A top tube mount for a feed bag or top tube bag.
  • Three-pack cargo mounts on each fork blade on bikes with the rigid carbon fork.
  • Fender mounts front and rear, with a removable fender bridge.
  • A StashPort storage compartment in the down tube, opened under the bottle cage.
  • Tyres up to 52 mm with a single chainring, or 45 mm with two.
  • Internal routing for a 27.2 mm dropper post.

Bags that work as normal

Frame bag. The front triangle is the most useful space on the bike. A Half Frame Long made to your triangle sits under the top tube and leaves room for the bottles on the two inside mounts. If you prefer volume to bottles, the custom full frame bag in X-Pac fills it. Mention that you ride a Topstone Carbon when you send the measurements, and that you want the rear edge of the bag kept off the seat tube junction, the area that flexes.

Top tube and feed bags. The top tube mount takes the bag you open most often. A pair of feed bags — such as the Feeder X-Pac set, 16 × 10 cm each, one with a drawstring and one with a buckled flap — holds a bottle and snacks within reach.

Handlebar. The stock Cannondale ShortDrop bar has a 12° flare at the drops, so a roll for soft gear fits between the hoods more easily than on a narrow road bar. The FILIN is a roll-top handlebar bag with a three-point mount, adjustable straps and a shoulder strap for carrying it off the bike.

Fork. With the rigid fork, the three-pack mounts take cages for water or small dry bags.

Bags on the moving part

Saddle bag. When Kingpin flexes, the saddle and post move down, towards the rear wheel. A large seat pack hanging close to the tyre can touch it on a big bump with fat tyres. A small saddle bag for the tube and tools, such as the MINI-1 or SD-3, avoids the problem. With a dropper post the same applies even more: the bag has to clear the tyre with the saddle all the way down. If you need more rear volume, a large seat pack is best used with a dedicated rack for it — and with a rack you can carry a bigger bag.

Seatstays. Do not strap bags or bottles to the seatstays on a Topstone Carbon. They are part of the moving rear end, and a strap there is the wrong place for weight anyway.

Topstone Alloy and Topstone Lefty

The aluminium Topstone is simpler for bags. Cannondale lists mounts for three bottles, top tube storage, three mounting points on each fork leg and sturdy rack mounts, with room for tyres up to 45 mm. That makes a rear rack the easy way to add volume: a NOMAD trunk bag (32 × 14 × 18 cm) for a day's kit, or the larger RANDONE rear rack bag for a weekend. Our guide to choosing a rear rack for bike bags covers the rack itself.

The Topstone Lefty uses Cannondale's single-sided Lefty Oliver suspension fork. The long-term review gives its tyre clearance as 700 × 47 mm. A suspension fork moves, so plan the front of a Lefty build around the handlebar and the frame rather than fork bags.

Five things that go wrong

  1. A long seat pack on a Kingpin bike with wide tyres. Fix: a small saddle bag, or a rack for the volume.
  2. A frame bag strapped hard to the seat tube junction. Fix: a bag cut to the triangle, with its rear edge kept off the junction.
  3. A handlebar roll that hits the levers. Fix: measure between the hoods and pack the roll shorter and fatter.
  4. Fork cages loaded unevenly. Fix: the same weight on each leg.
  5. Everything heavy on the bar. Fix: heavy and dense in the frame bag, light and bulky on the bar. See why weight distribution matters.

This is what LESENOK Colorful Cycling System Bags are for: bags with a fixed place on the bike, made to the space they occupy. Browse our frame bags and feed bags, or read our gravel bike bag guide.

In short

  • On a Topstone Carbon, the front triangle and fork are still; the seatpost and rear triangle move with Kingpin.
  • Frame bag, top tube bag, feed bags, handlebar roll and fork cages work as on any gravel bike.
  • Keep the saddle bag small and clear of the tyre, especially with wide tyres or a dropper; nothing on the seatstays.
  • The aluminium Topstone has rack mounts — a rear rack is the simple way to add volume.

Questions we get asked

Can I use a frame bag on a Topstone Carbon with Kingpin?

Yes. The frame bag sits in the front triangle. When you order a custom bag, ask for its rear edge to be kept off the seat tube junction, the area that flexes.

Can I put a large seat pack on a Topstone Carbon?

Be careful: the saddle moves down when Kingpin flexes, and a long bag can reach the tyre. A small saddle bag is the safe choice; for more volume, use a rack.

Send a side photo of your Topstone and tell us which version it is at [email protected], and we will suggest a frame bag shape that fits.

About LESENOK

LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].

Back to all articles
Help