Giant Revolt Bikepacking Bags: Working With the Small Triangle
The Giant Revolt is one of the most common gravel bikes on group rides and at the start of bikepacking routes, and one of the most common questions about it is simple: why does a normal frame bag look so small on it? The answer is in the frame. The Revolt has a steeply sloping top tube, which makes the bike easy to handle and leaves a short, low front triangle. Bags that suit a classic touring frame waste space on a Revolt, and a bag that fills the space well has to be cut to it.
For a Giant Revolt, plan around the small front triangle. Use a frame bag made to the actual shape of your triangle, either full or as a half frame bag above the bottles. Move the volume you lose there to the handlebar, the fork legs and the top tube mount. Check where your flip chip is before choosing a large rear bag, and remember that the D-shaped D-Fuse seatpost can be swapped for a round post or a dropper — which changes what a saddle bag can do.
The sloping top tube, explained
A sloping top tube drops from the head tube to a lower seat tube junction. The rider gets more standover room, and more of the seatpost sticks out of the frame. On the Revolt that exposed post is Giant's D-shaped D-Fuse post.
The trade-off is a triangle that is short at the back. On smaller sizes it is noticeably small. Two bottles, a frame bag and a pump may all compete for the same space. That is why a frame bag from the shelf either fits loosely, sits too low and blocks the bottles, or does not fit at all.
Frame bag: full or half
- Full frame bag. It fills the whole triangle and gives the most volume. Bottles move to the fork, under the down tube or into feed bags. This is the choice for bikepacking, when the frame bag carries food, tools and water.
- Half frame bag. It sits under the top tube and leaves room below for one or two bottles. This is the choice for long gravel days, when water matters more than volume.
Both work only if the bag follows your triangle. Our Half Frame Long and the custom full frame bag in X-Pac are made to the measurements of your frame. After you order we send a diagram of how to measure it. Very small triangles get a single compartment instead of the usual upper and lower pair. For small frames generally, see our guide to frame bags for small frames, and for the choice between the two shapes, full frame bag vs half frame bag.
Mounts you can use
Giant and the reviews of recent models describe these mounts. Check your own bike, because the aluminium Revolt and the carbon Revolt Advanced differ in detail:
- Top tube mount. Recent carbon Revolts have bolt-on mounts for a top tube bag, and Giant also counts a top tube mount on the aluminium frame. A top tube bag there is the most useful small bag on the bike.
- Fork legs. Mounts on each fork leg take cargo cages for bottles or small dry bags, which matters when the frame bag takes the triangle.
- Under the down tube. One more bottle or a tool canister.
- Fenders and rack. Fender mounts front and rear. The aluminium Revolt uses an adaptor at the seatpost to mount a rack.
Where the lost volume goes
On a Revolt the front triangle carries less than on a touring frame, so the rest of the bike works harder.
- Handlebar. A roll for the sleeping bag or spare layers. On a drop bar it must clear the levers and your hands in the drops, so it is often better to choose a shorter, fatter roll than a long thin one. The BIG ROLL and PANZER are both three-point rolls. For day rides, a handlebar bag from the GODZI line, such as GODZI-3, is enough.
- Feed bags. A pair either side of the stem for a bottle, snacks and the phone. The FX-1 opens with one hand while riding.
- Fork legs. Water first, then light things in small dry bags. Keep left and right equal.
The flip chip and the rear
The Revolt has a flip chip at the rear dropout. In the long position the wheelbase is longer and the frame takes wider tyres — Giant lists 53 mm in the long position. In the short position the bike is quicker to turn, and the tyre limit is lower. BikeRadar notes that the chip is there mainly to create more tyre clearance.
For bags, the chip matters in two ways. If you run wide tyres in the long position, check that a saddle bag still clears the rear tyre over bumps, when the post flexes. And if you plan a rack, fit it with the chip already in the position you ride, so the rack is level.
The D-Fuse seatpost and a saddle bag
The Revolt's D-Fuse post is D-shaped, not round. A small saddle bag straps to the saddle rails and the post as usual — pull the strap tight so it sits flat against the post. Giant also allows you to swap the D-Fuse post and its clamp insert for a round 30.9 mm post, which opens the door to a dropper post. With a dropper, a saddle bag has to be small enough not to hit the tyre when the saddle is down. Our SD-3 carries the tube and the repair kit without much length.
If you need more volume at the back, a large seat pack is best used with a dedicated rack for it, and with a rack you can also choose a bigger bag.
A Revolt setup, step by step
- Measure the triangle and decide: full frame bag or half frame bag with bottles.
- Add a top tube bag on the mount and a pair of feed bags.
- Put the sleep kit or spare layers in a handlebar roll that clears the drops.
- Use the fork mounts for water.
- Add a small saddle bag, and move to a rack only if the trip needs more.
Several LESENOK Colorful Cycling System Bags exist for exactly this kind of frame: the Gravel Weekend Set-3 combines a large frame bag made to your size with a front and a rear triangle bag. Our gravel bike bag guide has more ideas for drop-bar bikes.
In short
- The Revolt's sloping top tube leaves a short front triangle — off-the-shelf frame bags rarely use it well.
- Choose a custom full frame bag for volume or a half frame bag to keep bottles in the frame.
- Use the top tube mount, fork mounts and feed bags to replace the volume the frame can't hold.
- Check rear tyre clearance for a seat pack in the long flip-chip position, and fit a rack with the chip set.
- The D-shaped D-Fuse post takes a small saddle bag; a dropper needs a shorter one.
Questions we get asked
Will a frame bag fit a small Giant Revolt?
Yes, if it is made to your triangle. Small sizes have little room, so a very small bag is made with a single compartment. A half frame bag may be the better choice if you also want a bottle inside the frame.
Does a saddle bag work with the D-Fuse seatpost?
A small saddle bag straps to the rails and the D-shaped post as usual. Pull the strap tight so it sits flat.
Send us a side photo of your Revolt and the triangle measurements at [email protected], and we will tell you which frame bag shape makes the most of it.
About LESENOK
LESENOK makes handmade Colorful Cycling Systems — bike bags for commuting, touring, family rides and bikepacking. Over 100 models, more than 50 colours and prints, custom sizes cut to your own bicycle, and worldwide shipping with tracking. Handmade in Ukraine. In-stock items are processed in 1–3 business days; made-to-order and custom bags are typically produced in 7–12 business days. Questions: [email protected].
